Daily Archives

2 Articles

Posted by admin on

What You Should Know About Plaster

Plaster is a white powder consisting mainly of gypsum. It can be mixed with water to form a thick slurry that can be used to cast into moulds to reproduce objects or it can be used to make a mould that can reproduce finely detailed models Dalys Plastering Contractors.

A variety of plasters and gypsum cements are used in mould making, master models and finished art forms. These products originate from the highly versatile raw material gypsum more commonly known as “Plaster of Paris”.

Plasters used for Mould Making:

– Pottery Plaster

-Ultracal

Plasters used for Casting:

– Pottery Plaster

– Casting Plaster

– Hydrocal

– Hydrostone

– GardenCast

– FGR-95

Mould Making Plasters

Pottery Plaster

This is a high quality white plaster with the ability to absorb large amounts of moisture. This makes it ideal for use as a pottery mould by absorbing the water from the pottery slip used in casting. This leaves a semi- dry reproduction of the shape of sufficient thickness, to enable it to be removed from the mould for subsequent kiln firing, after the excess slip has been poured from the mould.

Ultracal 30

This is the most widely used gypsum cement with the lowest expansion rate available. It is ideal for casting polyester and epoxy resins as well as being the industry standard for casting foam latex. It has high strength with less tendency to warp. It has a set time of 30 minutes. It has a dry compressive of 6000psi.

Casting Plasters

Casting Plaster

This product is used for the economical production of figurines etc. from rubber or plastic moulds. It is ideal for young children in kindergarten and primary schools as a craft and educational tool. It is widely use in the production of” whiteware” for use in plaster painting classes.

It is ideally suited for these activities as it has a hard surface that resists chipping and provides an excellent surface for decorating.

White Hydrocal

This is a good general purpose product. It offers slightly better heat resistance together with higher wet and dry strengths. It is ideal for making pottery case moulds.

It is a neutral gypsum cement with a set time of 25 minutes. It is commonly used for casting both hollow and solid lamp bases and figurines. It is very white in colour.

Posted by admin on

The New Challenges in Entering Truck Driving Jobs

The trucking industry is now considered as the greener pasture by a lot of people who are looking for a career or switching from an existing career. The high demands for truck drivers attracted a lot of people who want to have rewarding sources of income and at the same time a lifetime career. But truck driving jobs aren’t just your ordinary jobs where you can get away by just impressing an interviewer or displaying mediocre skills. Jobs from the trucking industry require the right person for the right job because a lot of lives are at stake Dream Drivers.

Getting the right person is just like matching the missing piece for a puzzle. You have to look at every aspect in order to match the skills of the candidates to available positions that you have. That is why most trucking companies would even seek the help of a headhunter or an online jobsite to make the screening of the candidates easier. This is a part of the trucking industry’s responsibility to ensure safety in all of their operations. And so several formalities, licensing, and certifications are required is order to ensure the competence of the candidates especially the entry level.

Just like any other goal, an aspiring trucker has to strive hard in order to enter the trucking industry. Even people who have acquired years of experience in truck driving jobs are required to present some requirements with regards to their experience in handling trucks. This is the part where many applicants fail especially the new entry truck drivers. They were not able to prove their capabilities in handling a truck. Stay on the safe side and find a qualified CDL (Commercial Truck Driving) school that will not only provide the right skills and knowledge that you need but will also refer you to best trucking companies.

There are many cases where applicants who completed a truck driving course still cannot qualify. The reason is always the same which is lack of truck driving experience. There are many factors that you need to realize before spending a lot of dollars in truck driving schools. It is true that finishing a course from a qualified truck driving school increases your chances of landing a job in the trucking industry. But one has to realize that there are more to consider than the trucking companies such as the strict regulations for every state and the requirements of insurance companies.

Truck driving jobs were also affected by the past threats to national security. After a series of terrorist attacks in the United States, the laws governing commercial truck driving have gotten stricter. It is therefore important to consider having truck driving experience for six months or more in order to be clear from any factors that may disqualify you both in trucking companies and insurance providers. It would be better if you can manage to find the best trucking companies that can assist you in your training and give you initial driving experiences from a program that is usually called on the job training.